CLI commands

Policy findings, repair, and exit codes

Interpreting a policy finding, repairing it, and the exit codes. Part of the openclaw policy reference.

Findings

Check id	Finding
`policy/policy-jsonc-missing`	Policy is enabled but `policy.jsonc` is missing.
`policy/policy-jsonc-invalid`	Policy cannot be parsed or contains malformed rule entries.
`policy/policy-hash-mismatch`	Policy does not match configured `expectedHash`.
`policy/attestation-hash-mismatch`	Current policy evidence no longer matches the accepted attestation.
`policy/policy-conformance-invalid`	A baseline or checked policy file has invalid comparison syntax.
`policy/policy-conformance-missing`	A checked policy file is missing a rule required by the baseline policy file.
`policy/policy-conformance-weaker`	A checked policy file has a weaker value than the baseline policy file.
`policy/channels-denied-provider`	An enabled channel matches a channel deny rule.
`policy/mcp-denied-server`	A configured MCP server is denied by policy.
`policy/mcp-unapproved-server`	A configured MCP server is outside the allowlist.
`policy/models-denied-provider`	A configured model provider or model ref uses a denied provider.
`policy/models-unapproved-provider`	A configured model provider or model ref is outside the allowlist.
`policy/network-private-access-enabled`	A private-network SSRF escape hatch is enabled when policy denies it.
`policy/routing-bindings-required`	Policy requires a channel route binding, but none is configured.
`policy/routing-binding-channel-unconfigured`	A route binding names a channel absent from `channels.*`.
`policy/routing-agent-mismatch`	An authored route resolves to a different agent.
`policy/routing-match-kind-mismatch`	An authored route matches at an unexpected binding specificity.
`policy/ingress-dm-policy-unapproved`	A channel DM policy is outside the policy allowlist.
`policy/ingress-dm-scope-unapproved`	`session.dmScope` does not match the policy-required DM isolation scope.
`policy/ingress-open-groups-denied`	A channel group policy is `open` while policy denies open group ingress.
`policy/ingress-group-mention-required`	A channel or group entry disables mention gates while policy requires them.
`policy/gateway-non-loopback-bind`	Gateway bind posture permits non-loopback exposure when policy denies it.
`policy/gateway-auth-disabled`	Gateway authentication is disabled when policy requires auth.
`policy/gateway-rate-limit-missing`	Gateway auth rate-limit posture is not explicit when policy requires it.
`policy/gateway-control-ui-insecure`	Gateway Control UI insecure exposure toggles are enabled.
`policy/gateway-tailscale-funnel`	Gateway Tailscale Funnel exposure is enabled when policy denies it.
`policy/gateway-remote-enabled`	Gateway remote mode is active when policy denies it.
`policy/gateway-http-endpoint-enabled`	A Gateway HTTP API endpoint is enabled while denied by policy.
`policy/gateway-http-url-fetch-unrestricted`	Gateway HTTP URL-fetch input lacks a required URL allowlist.
`policy/gateway-node-command-denied`	A node command denied by policy is not denied by OpenClaw config.
`policy/agents-workspace-access-denied`	Agent sandbox mode or workspace access is outside the policy allowlist.
`policy/agents-tool-not-denied`	An agent or default config does not deny a tool required by policy.
`policy/tools-profile-unapproved`	A configured global or per-agent tool profile is outside the allowlist.
`policy/tools-fs-workspace-only-required`	Filesystem tools are not configured with workspace-only path posture.
`policy/tools-exec-security-unapproved`	Exec security mode is outside the policy allowlist.
`policy/tools-exec-ask-unapproved`	Exec ask mode is outside the policy allowlist.
`policy/tools-exec-host-unapproved`	Exec host routing is outside the policy allowlist.
`policy/tools-elevated-enabled`	Elevated tool mode is enabled when policy denies it.
`policy/tools-also-allow-missing`	A configured `alsoAllow` list is missing an entry required by policy.
`policy/tools-also-allow-unexpected`	A configured `alsoAllow` list includes an entry not expected by policy.
`policy/tools-required-deny-missing`	A global or per-agent tool deny list does not include a required denied tool.
`policy/sandbox-mode-unapproved`	Sandbox mode is outside the policy allowlist.
`policy/sandbox-backend-unapproved`	Sandbox backend is outside the policy allowlist.
`policy/sandbox-container-posture-unobservable`	A container posture rule is enabled for a backend that cannot observe it.
`policy/sandbox-container-host-network-denied`	A container-backed sandbox or browser uses host network mode.
`policy/sandbox-container-namespace-join-denied`	A container-backed sandbox or browser joins another container namespace.
`policy/sandbox-container-mount-mode-required`	A container-backed sandbox or browser mount is not read-only.
`policy/sandbox-container-runtime-socket-mount`	A container-backed sandbox or browser mount exposes the container runtime socket.
`policy/sandbox-container-unconfined-profile`	Container sandbox profile is unconfined when policy denies it.
`policy/sandbox-browser-cdp-source-range-missing`	Sandbox browser CDP source range is missing when policy requires one.
`policy/data-handling-telemetry-content-capture`	Telemetry content capture is enabled when policy denies it.
`policy/data-handling-session-retention-not-enforced`	Session retention maintenance is not enforced when policy requires it.
`policy/data-handling-session-transcript-memory-enabled`	Session transcript memory indexing is enabled when policy denies it.
`policy/secrets-unmanaged-provider`	A config SecretRef references a provider not declared under `secrets.providers`.
`policy/secrets-denied-provider-source`	A config secret provider or SecretRef uses a source denied by policy.
`policy/secrets-insecure-provider`	A secret provider opts into insecure posture when policy denies it.
`policy/auth-profile-invalid-metadata`	A config auth profile is missing valid provider or mode metadata.
`policy/auth-profile-unapproved-mode`	A config auth profile mode is outside the policy allowlist.
`policy/exec-approvals-missing`	Policy requires the SQLite exec approvals document, but its row is missing.
`policy/exec-approvals-invalid`	The configured SQLite exec approvals document cannot be parsed.
`policy/exec-approvals-default-security-unapproved`	Exec approval defaults use a security mode outside the policy allowlist.
`policy/exec-approvals-agent-security-unapproved`	A per-agent effective exec approval security mode is outside the allowlist.
`policy/exec-approvals-auto-allow-skills-enabled`	An exec approval agent implicitly auto-allows skill CLIs when policy denies it.
`policy/exec-approvals-allowlist-missing`	The approvals allowlist is missing a pattern required by policy.
`policy/exec-approvals-allowlist-unexpected`	The approvals allowlist includes a pattern not expected by policy.
`policy/tools-missing-risk-level`	A governed tool declaration is missing risk metadata.
`policy/tools-unknown-risk-level`	A governed tool declaration uses an unknown risk value.
`policy/tools-missing-sensitivity-token`	A governed tool declaration is missing sensitivity metadata.
`policy/tools-missing-owner`	A governed tool declaration is missing owner metadata.
`policy/tools-unknown-sensitivity-token`	A governed tool declaration uses an unknown sensitivity value.

A finding can include both target (the observed workspace thing that does not conform) and requirement (the authored rule that made it a finding). Both are oc:// address strings today, but the field names describe policy role rather than address format.

Example findings:

json

{  "checkId": "policy/channels-denied-provider",  "severity": "error",  "message": "Channel 'telegram' uses denied provider 'telegram'.",  "source": "policy",  "path": "openclaw config",  "ocPath": "oc://openclaw.config/channels/telegram",  "target": "oc://openclaw.config/channels/telegram",  "requirement": "oc://policy.jsonc/channels/denyRules/#0",  "fixHint": "Telegram is not approved for this workspace."}

json

{  "checkId": "policy/tools-missing-risk-level",  "severity": "error",  "message": "AGENTS.md tool 'deploy' has no explicit risk classification.",  "source": "policy",  "path": "AGENTS.md",  "line": 12,  "ocPath": "oc://AGENTS.md/tools/deploy",  "target": "oc://AGENTS.md/tools/deploy",  "requirement": "oc://policy.jsonc/tools/requireMetadata"}

json

{  "checkId": "policy/mcp-unapproved-server",  "severity": "error",  "message": "MCP server 'remote' is not in the policy allowlist.",  "source": "policy",  "path": "openclaw config",  "ocPath": "oc://openclaw.config/mcp/servers/remote",  "target": "oc://openclaw.config/mcp/servers/remote",  "requirement": "oc://policy.jsonc/mcp/servers/allow"}

json

{  "checkId": "policy/models-unapproved-provider",  "severity": "error",  "message": "Model ref 'anthropic/claude-sonnet-4.7' uses unapproved provider 'anthropic'.",  "source": "policy",  "path": "openclaw config",  "ocPath": "oc://openclaw.config/agents/defaults/model/fallbacks/#0",  "target": "oc://openclaw.config/agents/defaults/model/fallbacks/#0",  "requirement": "oc://policy.jsonc/models/providers/allow"}

json

{  "checkId": "policy/network-private-access-enabled",  "severity": "error",  "message": "Network setting 'browser-private-network' allows private-network access.",  "source": "policy",  "path": "openclaw config",  "ocPath": "oc://openclaw.config/browser/ssrfPolicy/dangerouslyAllowPrivateNetwork",  "target": "oc://openclaw.config/browser/ssrfPolicy/dangerouslyAllowPrivateNetwork",  "requirement": "oc://policy.jsonc/network/privateNetwork/allow"}

json

{  "checkId": "policy/gateway-non-loopback-bind",  "severity": "error",  "message": "Gateway bind setting 'gateway-bind' permits non-loopback exposure.",  "source": "policy",  "path": "openclaw config",  "ocPath": "oc://openclaw.config/gateway/bind",  "target": "oc://openclaw.config/gateway/bind",  "requirement": "oc://policy.jsonc/gateway/exposure/allowNonLoopbackBind"}

json

{  "checkId": "policy/gateway-node-command-denied",  "severity": "error",  "message": "Gateway node command 'system.run' is denied by policy but not denied by OpenClaw config.",  "source": "policy",  "path": "openclaw config",  "ocPath": "oc://openclaw.config/gateway/nodes/commands/deny",  "target": "oc://openclaw.config/gateway/nodes/commands/deny",  "requirement": "oc://policy.jsonc/gateway/nodes/denyCommands",  "fixHint": "Add 'system.run' to gateway.nodes.commands.deny or update policy after review."}

json

{  "checkId": "policy/agents-workspace-access-denied",  "severity": "error",  "message": "agents.defaults sandbox workspaceAccess 'rw' is not allowed by policy.",  "source": "policy",  "path": "openclaw config",  "ocPath": "oc://openclaw.config/agents/defaults/sandbox/workspaceAccess",  "target": "oc://openclaw.config/agents/defaults/sandbox/workspaceAccess",  "requirement": "oc://policy.jsonc/agents/workspace/allowedAccess"}

Repair

doctor --lint and policy check are read-only.

doctor --fix only edits policy-managed workspace settings when workspaceRepairs is explicitly enabled; otherwise checks report what they would repair and leave settings unchanged.

In this version, repair can disable channels denied by channels.denyRules and apply the automatic narrowing repairs listed below. Enable workspaceRepairs only after the policy file has been reviewed, because a valid rule can change workspace config:

set tools.elevated.enabled=false when a global policy forbids elevated tools
add missing required-deny tool ids to tools.deny or agents.entries.*.tools.deny when policy requires those tools to be denied
set insecure gateway.controlUi.* toggles to false
set gateway.mode=local when policy denies remote gateway mode
set reported gateway.http.endpoints.*.enabled paths to false when policy denies Gateway HTTP API endpoints
set reported channel ingress groupPolicy paths to allowlist when policy denies open group ingress
set reported channel ingress requireMention paths to true when policy requires group mentions
set diagnostics.otel.captureContent=false, or diagnostics.otel.captureContent.enabled=false for object-form telemetry capture settings, when policy denies telemetry content capture

Scoped elevated-tools repairs are detect-only. Scoped data-handling repairs are also skipped when the finding reports shared telemetry config, because changing the shared setting would affect more than the scoped policy target.

dataHandling.sensitiveLogging.requireRedaction has no check and no repair. Sensitive log redaction is unconditional in OpenClaw, so nothing can report it as disabled. The key stays a supported policy rule: openclaw policy validates its shape, openclaw policy compare still requires a candidate policy to be at least as strict as the baseline for it, and openclaw policy check records the runtime invariant oc://openclaw.invariant/logging/redaction in the dataHandling evidence and attestation as proof the requirement is satisfied.

Scoped required-deny repairs are skipped when the finding reports inherited root tools.deny, because adding the required tool to root config would affect more than the scoped policy target. Agent-local required-deny repairs can update the reported agents.entries.*.tools.deny path.

Scoped channel ingress repairs are skipped when the finding reports inherited channels.defaults.*, because changing the shared channel default would affect more than the scoped policy target. Gateway HTTP URL-fetch allowlist findings remain manual because automatic repair cannot choose the correct endpoint URL allowlist values.

Gateway bind and node-command findings stay review-required. When policy/gateway-non-loopback-bind or policy/gateway-node-command-denied can be mapped to a config path, doctor --fix reports the proposed gateway.bind or gateway.nodes.commands.deny change as skipped preview guidance. It does not apply the change, and the finding does not count as repaired until an operator reviews and updates config or policy.

jsonc

{  "plugins": {    "entries": {      "policy": {        "config": {          "workspaceRepairs": true,        },      },    },  },}

Exit codes

Command	`0`	`1`	`2`
`policy check`	No findings at the threshold.	One or more findings met the threshold.	Argument or runtime failure.
`policy compare`	The policy file is at least as strict as the baseline.	The policy file is invalid, missing, or weaker than baseline rules.	Argument or runtime failure.
`policy watch`	No findings and accepted hash is current.	Findings exist or accepted attestation is stale.	Argument or runtime failure.

Was this useful?

Policy findings, repair, and exit codes

Findings

Repair

Exit codes

On this page

Molty