Get started

SMS

OpenClaw can receive and send SMS through a Twilio phone number or Messaging Service. The Gateway registers an inbound webhook route, validates Twilio request signatures by default, and sends replies back through Twilio's Messages API.

Pairing

Default DM policy for SMS is pairing.

Gateway security

Review webhook exposure and sender access controls.

Channel troubleshooting

Cross-channel diagnostics and repair playbooks.

Before you begin

You need:

A Twilio account with an SMS-capable phone number, or a Twilio Messaging Service.
The Twilio Account SID and Auth Token.
A public HTTPS URL that reaches your OpenClaw Gateway.
A sender policy choice: pairing for private use, allowlist for preapproved phone numbers, or open only for intentionally public SMS access.

Use one Twilio number for both SMS and Voice Call if the number has both capabilities. Configure the SMS webhook and Voice webhook separately in Twilio; this page only covers the SMS webhook.

Quick Setup

Create or choose a Twilio sender

In Twilio, open Phone Numbers > Manage > Active numbers and choose an SMS-capable number. Save:

Account SID, for example ACxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Auth Token
Sender phone number, for example +15551234567

If you use a Messaging Service instead of a fixed sender number, save the Messaging Service SID, for example MGxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.

Configure the SMS channel

Save this as sms.patch.json5 and change the placeholders:

json5

{channels: {sms: {  enabled: true,  accountSid: "ACxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",  authToken: "twilio-auth-token",  fromNumber: "+15551234567",  publicWebhookUrl: "https://gateway.example.com/webhooks/sms",  dmPolicy: "pairing",},},}

Apply it:

bash

openclaw config patch --file ./sms.patch.json5 --dry-runopenclaw config patch --file ./sms.patch.json5

Point Twilio at the Gateway webhook

In the Twilio phone number settings, open Messaging and set A message comes in to:

text

https://gateway.example.com/webhooks/sms

Use HTTP POST. The default local path is /webhooks/sms; change channels.sms.webhookPath if you need a different route.

Expose the exact SMS webhook path

Your public URL must route the SMS path to the Gateway process. If you use Tailscale Funnel for local testing, expose /webhooks/sms explicitly:

bash

tailscale funnel --bg --set-path /webhooks/sms http://127.0.0.1:<gateway-port>/webhooks/smstailscale funnel status

Voice Call and SMS use separate webhook paths. If the same Twilio number handles both, keep both routes configured in Twilio and in your tunnel.

Start the Gateway and approve first sender

bash

openclaw gateway

Send a text message to the Twilio number. The first message creates a pairing request. Approve it:

bash

openclaw pairing list smsopenclaw pairing approve sms &lt;CODE&gt;

Pairing codes expire after 1 hour.

Configuration Examples

Config file

Use config-file setup when you want the channel definition to travel with the Gateway config:

json5

{  channels: {    sms: {      enabled: true,      accountSid: "ACxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",      authToken: "twilio-auth-token",      fromNumber: "+15551234567",      publicWebhookUrl: "https://gateway.example.com/webhooks/sms",      dmPolicy: "pairing",    },  },}

Environment variables

Use env setup for single-account deployments where secrets come from the host environment:

bash

export TWILIO_ACCOUNT_SID="ACxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"export TWILIO_AUTH_TOKEN="<twilio-auth-token>"export TWILIO_PHONE_NUMBER="+15551234567"export SMS_PUBLIC_WEBHOOK_URL="https://gateway.example.com/webhooks/sms"

Then enable the channel in config:

json5

{  channels: {    sms: {      enabled: true,      dmPolicy: "pairing",    },  },}

TWILIO_SMS_FROM is accepted as an alias for TWILIO_PHONE_NUMBER. Use TWILIO_MESSAGING_SERVICE_SID instead of a phone-number sender when Twilio should choose the sender from a Messaging Service.

SecretRef auth token

authToken can be a SecretRef. Use this when the Gateway should resolve the Twilio Auth Token from the OpenClaw secrets runtime instead of storing plaintext config:

json5

{  channels: {    sms: {      enabled: true,      accountSid: "ACxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",      authToken: { source: "env", provider: "default", id: "TWILIO_AUTH_TOKEN" },      fromNumber: "+15551234567",      publicWebhookUrl: "https://gateway.example.com/webhooks/sms",      dmPolicy: "pairing",    },  },}

The referenced environment variable or secret provider must be visible to the Gateway runtime. Restart managed Gateway processes after changing host environment variables.

Allowlist-only private number

Use allowlist when only known phone numbers should be able to talk to the agent:

json5

{  channels: {    sms: {      enabled: true,      accountSid: "ACxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",      authToken: "twilio-auth-token",      fromNumber: "+15551234567",      publicWebhookUrl: "https://gateway.example.com/webhooks/sms",      dmPolicy: "allowlist",      allowFrom: ["+15557654321"],    },  },}

Messaging Service sender

Use messagingServiceSid instead of fromNumber when Twilio should choose the sender through a Messaging Service:

json5

{  channels: {    sms: {      enabled: true,      accountSid: "ACxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",      authToken: "twilio-auth-token",      messagingServiceSid: "MGxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",      publicWebhookUrl: "https://gateway.example.com/webhooks/sms",      dmPolicy: "pairing",    },  },}

If both fromNumber and messagingServiceSid are present after config and env resolution, fromNumber is used.

Default outbound target

Set defaultTo when automation or agent-initiated delivery should have a default destination if a send flow omits an explicit target:

json5

{  channels: {    sms: {      enabled: true,      accountSid: "ACxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",      authToken: "twilio-auth-token",      fromNumber: "+15551234567",      defaultTo: "+15557654321",      publicWebhookUrl: "https://gateway.example.com/webhooks/sms",    },  },}

Access control

channels.sms.dmPolicy controls direct SMS access:

pairing (default)
allowlist (requires at least one sender in allowFrom)
open (requires allowFrom to include "*")
disabled

allowFrom entries should be E.164 phone numbers such as +15551234567. sms: prefixes are accepted and normalized. For a private assistant, prefer dmPolicy: "allowlist" with explicit phone numbers.

Sending SMS

Outbound SMS targets use the sms: service prefix with the SMS channel selected:

bash

openclaw message send --channel sms --target sms:+15551234567 --message "hello"

When channel selection is implicit, twilio-sms:+15551234567 selects this channel without taking over the existing channel-owned sms: service prefix used by iMessage.

bash

openclaw message send --target twilio-sms:+15551234567 --message "hello"

The CLI requires an explicit --target. defaultTo is for automation and agent-initiated delivery paths where the target can be resolved from channel config.

Agent replies from inbound SMS conversations automatically go back to the sender through the configured Twilio sender.

SMS output is plain text. OpenClaw strips markdown, flattens fenced code blocks, preserves readable links, and chunks long replies before sending them through Twilio.

Verify Setup

After the Gateway starts:

Confirm the Gateway log shows the SMS webhook route.
Run a Twilio-side probe:

bash

openclaw channels capabilities --channel smsopenclaw channels status --channel sms --probe --json

Send an SMS to the Twilio number from your phone.
Run openclaw pairing list sms.
Approve the pairing code with openclaw pairing approve sms <CODE>.
Send another SMS and confirm the agent replies.

For outbound-only testing, use:

bash

openclaw message send --channel sms --target sms:+15557654321 --message "OpenClaw SMS test"

End-to-end test from macOS iMessage/SMS

On a Mac that can send carrier SMS through Messages, you can use imsg to drive the sender side without touching your phone:

bash

imsg send --to "+15551234567" --service sms --text "OpenClaw SMS E2E $(date -u +%Y%m%dT%H%M%SZ)" --jsonopenclaw pairing list smsopenclaw pairing approve sms &lt;CODE&gt;imsg send --to "+15551234567" --service sms --text "reply exactly SMS pong" --json

The first message should create a pairing request. The second message should receive the agent reply through Twilio.

Webhook security

By default, OpenClaw validates X-Twilio-Signature using publicWebhookUrl and authToken. Keep publicWebhookUrl byte-for-byte aligned with the URL configured in Twilio, including scheme, host, path, and query string.

For local tunnel testing only, you can set:

json5

{  channels: {    sms: {      dangerouslyDisableSignatureValidation: true,    },  },}

Do not use disabled signature validation on a public Gateway.

Multi-account config

Use accounts when you operate more than one Twilio number:

json5

{  channels: {    sms: {      accounts: {        support: {          enabled: true,          accountSid: "ACxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",          authToken: "twilio-auth-token",          fromNumber: "+15551234567",          publicWebhookUrl: "https://gateway.example.com/webhooks/sms/support",          webhookPath: "/webhooks/sms/support",          dmPolicy: "allowlist",          allowFrom: ["+15557654321"],        },      },    },  },}

Each account should use a distinct webhookPath.

Troubleshooting

Twilio returns 403 or OpenClaw rejects the webhook

Check that publicWebhookUrl exactly matches the URL configured in Twilio, including scheme, host, path, and query string. Twilio signs the public URL string, so proxy rewrites and alternate hostnames can break signature validation.

No pairing request appears

Check the Twilio number's Messaging webhook URL and method. It must point to the SMS webhook URL and use POST. Also confirm the Gateway is reachable from the public internet or through your tunnel.

If the Twilio message log shows error 11200, Twilio accepted the inbound SMS but could not reach your webhook. Check:

Twilio Messaging > A message comes in points at publicWebhookUrl.
The method is POST.
The tunnel or reverse proxy exposes the exact webhookPath; for Tailscale Funnel, run tailscale funnel status and confirm /webhooks/sms is listed.
publicWebhookUrl uses the same scheme, host, path, and query string Twilio sends, so signature validation can reproduce the signed URL.

Outbound sends fail

Confirm accountSid, authToken, and either fromNumber or messagingServiceSid are resolved. If you use a trial Twilio account, the destination number may need to be verified in Twilio before outbound SMS will send.

Messages arrive but the agent does not answer

Check dmPolicy and allowFrom. With the default pairing policy, the sender must be approved before normal agent turns are processed.

Was this useful?