> ## Documentation Index
> Fetch the complete documentation index at: https://docs.openclaw.ai/llms.txt
> Use this file to discover all available pages before exploring further.

# Bonjour discovery

OpenClaw can use Bonjour (mDNS / DNS-SD) to discover an active Gateway (WebSocket endpoint).
Multicast `local.` browsing is a **LAN-only convenience**. The bundled `bonjour`
plugin owns LAN advertising. It auto-starts on macOS hosts and is opt-in on
Linux, Windows, and containerized Gateway deployments. For cross-network discovery, the same
beacon can also be published through a configured wide-area DNS-SD domain. Discovery
is still best-effort and does **not** replace SSH or Tailnet-based connectivity.

## Wide-area Bonjour (Unicast DNS-SD) over Tailscale

If the node and gateway are on different networks, multicast mDNS won't cross the
boundary. You can keep the same discovery UX by switching to **unicast DNS-SD**
("Wide-Area Bonjour") over Tailscale.

High-level steps:

1. Run a DNS server on the gateway host (reachable over Tailnet).
2. Publish DNS-SD records for `_openclaw-gw._tcp` under a dedicated zone
   (example: `openclaw.internal.`).
3. Configure Tailscale **split DNS** so your chosen domain resolves via that
   DNS server for clients (including iOS).

OpenClaw supports any discovery domain; `openclaw.internal.` is just an example.
iOS/Android nodes browse both `local.` and your configured wide-area domain.

### Gateway config (recommended)

```json5 theme={"theme":{"light":"min-light","dark":"min-dark"}}
{
  gateway: { bind: "tailnet" }, // tailnet-only (recommended)
  discovery: { wideArea: { enabled: true } }, // enables wide-area DNS-SD publishing
}
```

### One-time DNS server setup (gateway host)

```bash theme={"theme":{"light":"min-light","dark":"min-dark"}}
openclaw dns setup --apply
```

This installs CoreDNS and configures it to:

* listen on port 53 only on the gateway's Tailscale interfaces
* serve your chosen domain (example: `openclaw.internal.`) from `~/.openclaw/dns/<domain>.db`

Validate from a tailnet-connected machine:

```bash theme={"theme":{"light":"min-light","dark":"min-dark"}}
dns-sd -B _openclaw-gw._tcp openclaw.internal.
dig @<TAILNET_IPV4> -p 53 _openclaw-gw._tcp.openclaw.internal PTR +short
```

### Tailscale DNS settings

In the Tailscale admin console:

* Add a nameserver pointing at the gateway's tailnet IP (UDP/TCP 53).
* Add split DNS so your discovery domain uses that nameserver.

Once clients accept tailnet DNS, iOS nodes and CLI discovery can browse
`_openclaw-gw._tcp` in your discovery domain without multicast.

### Gateway listener security (recommended)

The Gateway WS port (default `18789`) binds to loopback by default. For LAN/tailnet
access, bind explicitly and keep auth enabled.

For tailnet-only setups:

* Set `gateway.bind: "tailnet"` in `~/.openclaw/openclaw.json`.
* Restart the Gateway (or restart the macOS menubar app).

## What advertises

Only the Gateway advertises `_openclaw-gw._tcp`. LAN multicast advertising is
provided by the bundled `bonjour` plugin when the plugin is enabled; wide-area
DNS-SD publishing remains Gateway-owned.

## Service types

* `_openclaw-gw._tcp` - gateway transport beacon (used by macOS/iOS/Android nodes).

## TXT keys (non-secret hints)

The Gateway advertises small non-secret hints to make UI flows convenient:

* `role=gateway`
* `displayName=<friendly name>`
* `lanHost=<hostname>.local`
* `gatewayPort=<port>` (Gateway WS + HTTP)
* `gatewayTls=1` (only when TLS is enabled)
* `gatewayTlsSha256=<sha256>` (only when TLS is enabled and fingerprint is available)
* `canvasPort=<port>` (only when the canvas host is enabled; currently the same as `gatewayPort`)
* `transport=gateway`
* `tailnetDns=<magicdns>` (mDNS full mode only, optional hint when Tailnet is available)
* `sshPort=<port>` (full mode only; omitted in minimal and off modes)
* `cliPath=<path>` (full mode only; omitted in minimal and off modes)

Security notes:

* Bonjour/mDNS TXT records are **unauthenticated**. Clients must not treat TXT as authoritative routing.
* Clients should route using the resolved service endpoint (SRV + A/AAAA). Treat `lanHost`, `tailnetDns`, `gatewayPort`, and `gatewayTlsSha256` as hints only.
* SSH auto-targeting should likewise use the resolved service host, not TXT-only hints.
* TLS pinning must never allow an advertised `gatewayTlsSha256` to override a previously stored pin.
* iOS/Android nodes should treat discovery-based direct connects as **TLS-only** and require explicit user confirmation before trusting a first-time fingerprint.

## Debugging on macOS

Useful built-in tools:

* Browse instances:

  ```bash theme={"theme":{"light":"min-light","dark":"min-dark"}}
  dns-sd -B _openclaw-gw._tcp local.
  ```

* Resolve one instance (replace `<instance>`):

  ```bash theme={"theme":{"light":"min-light","dark":"min-dark"}}
  dns-sd -L "<instance>" _openclaw-gw._tcp local.
  ```

If browsing works but resolving fails, you're usually hitting a LAN policy or
mDNS resolver issue.

## Debugging in Gateway logs

The Gateway writes a rolling log file (printed on startup as
`gateway log file: ...`). Look for `bonjour:` lines, especially:

* `bonjour: advertise failed ...`
* `bonjour: suppressing ciao cancellation ...`
* `bonjour: ... name conflict resolved` / `hostname conflict resolved`
* `bonjour: watchdog detected non-announced service ...`
* `bonjour: disabling advertiser after ... failed restarts ...`

The watchdog treats active `probing`, `announcing`, and fresh conflict-renames as
in-progress states. If the service never reaches `announced`, OpenClaw eventually
recreates the advertiser and, after repeated failures, disables Bonjour for that
Gateway process instead of re-advertising forever.

Bonjour uses the system hostname for the advertised `.local` host when it is a
valid DNS label. If the system hostname contains spaces, underscores, or another
invalid DNS-label character, OpenClaw falls back to `openclaw.local`. Set
`OPENCLAW_MDNS_HOSTNAME=<name>` before starting the Gateway when you need an
explicit host label.

## Debugging on iOS node

The iOS node uses `NWBrowser` to discover `_openclaw-gw._tcp`.

To capture logs:

* Settings → Gateway → Advanced → **Discovery Debug Logs**
* Settings → Gateway → Advanced → **Discovery Logs** → reproduce → **Copy**

The log includes browser state transitions and result-set changes.

## When to enable Bonjour

Bonjour auto-starts for empty-config Gateway startup on macOS hosts because the
local app and nearby iOS/Android nodes commonly rely on same-LAN discovery.

Enable Bonjour explicitly when same-LAN auto-discovery is useful on Linux,
Windows, or another non-macOS host:

```bash theme={"theme":{"light":"min-light","dark":"min-dark"}}
openclaw plugins enable bonjour
```

When enabled, Bonjour uses `discovery.mdns.mode` to decide how much TXT metadata
to publish. The same mode controls optional TXT hints in wide-area DNS-SD records.
The default mode is `minimal`; use `full` only when clients need `cliPath` or
`sshPort` hints. Use `off` to suppress LAN multicast without changing plugin
enablement; wide-area DNS-SD can still publish the minimal Gateway beacon when
`discovery.wideArea.enabled` is true.

## When to disable Bonjour

Leave Bonjour disabled when LAN multicast advertising is unnecessary, unavailable,
or harmful. The common cases are non-macOS servers, Docker bridge networking,
WSL, or a network policy that drops mDNS multicast. In those environments the
Gateway is still reachable through its published URL, SSH, Tailnet, or wide-area
DNS-SD, but LAN auto-discovery is not reliable.

Prefer the existing environment override when the problem is deployment-scoped:

```bash theme={"theme":{"light":"min-light","dark":"min-dark"}}
OPENCLAW_DISABLE_BONJOUR=1
```

That disables LAN multicast advertising without changing plugin configuration.
It is safe for Docker images, service files, launch scripts, and one-off
debugging because the setting disappears when the environment does.

Use plugin configuration when you intentionally want to turn off the bundled LAN
discovery plugin for that OpenClaw config:

```bash theme={"theme":{"light":"min-light","dark":"min-dark"}}
openclaw plugins disable bonjour
```

## Docker gotchas

The bundled Bonjour plugin auto-disables LAN multicast advertising in detected
containers when `OPENCLAW_DISABLE_BONJOUR` is unset. Docker bridge networks
usually do not forward mDNS multicast (`224.0.0.251:5353`) between the container
and the LAN, so advertising from the container rarely makes discovery work.

Important gotchas:

* Bonjour auto-starts on macOS hosts and is opt-in elsewhere. Leaving it
  disabled does not stop the Gateway; it only skips LAN multicast advertising.
* Disabling Bonjour does not change `gateway.bind`; Docker still defaults to
  `OPENCLAW_GATEWAY_BIND=lan` so the published host port can work.
* Disabling Bonjour does not disable wide-area DNS-SD. Use wide-area discovery
  or Tailnet when the Gateway and node are not on the same LAN.
* Reusing the same `OPENCLAW_CONFIG_DIR` outside Docker does not persist the
  container auto-disable policy.
* Set `OPENCLAW_DISABLE_BONJOUR=0` only for host networking, macvlan, or another
  network where mDNS multicast is known to pass; set it to `1` to force-disable.

## Troubleshooting disabled Bonjour

If a node no longer auto-discovers the Gateway after Docker setup:

1. Confirm whether the Gateway is running in auto, forced-on, or forced-off mode:

   ```bash theme={"theme":{"light":"min-light","dark":"min-dark"}}
   docker compose config | grep OPENCLAW_DISABLE_BONJOUR
   ```

2. Confirm the Gateway itself is reachable through the published port:

   ```bash theme={"theme":{"light":"min-light","dark":"min-dark"}}
   curl -fsS http://127.0.0.1:18789/healthz
   ```

3. Use a direct target when Bonjour is disabled:
   * Control UI or local tools: `http://127.0.0.1:18789`
   * LAN clients: `http://<gateway-host>:18789`
   * Cross-network clients: Tailnet MagicDNS, Tailnet IP, SSH tunnel, or
     wide-area DNS-SD

4. If you deliberately enabled the Bonjour plugin in Docker and forced advertising
   with `OPENCLAW_DISABLE_BONJOUR=0`, test multicast from the host:

   ```bash theme={"theme":{"light":"min-light","dark":"min-dark"}}
   dns-sd -B _openclaw-gw._tcp local.
   ```

   If browsing is empty or the Gateway logs show repeated ciao watchdog
   cancellations, restore `OPENCLAW_DISABLE_BONJOUR=1` and use a direct or
   Tailnet route.

## Common failure modes

* **Bonjour doesn't cross networks**: use Tailnet or SSH.
* **Multicast blocked**: some Wi-Fi networks disable mDNS.
* **Advertiser stuck in probing/announcing**: hosts with blocked multicast,
  container bridges, WSL, or interface churn can leave the ciao advertiser in a
  non-announced state. OpenClaw retries a few times and then disables Bonjour
  for the current Gateway process instead of restarting the advertiser forever.
* **Docker bridge networking**: Bonjour auto-disables in detected containers.
  Set `OPENCLAW_DISABLE_BONJOUR=0` only for host, macvlan, or another
  mDNS-capable network.
* **Sleep / interface churn**: macOS may temporarily drop mDNS results; retry.
* **Browse works but resolve fails**: keep machine names simple (avoid emojis or
  punctuation), then restart the Gateway. The service instance name derives from
  the host name, so overly complex names can confuse some resolvers.

## Escaped instance names (`\032`)

Bonjour/DNS-SD often escapes bytes in service instance names as decimal `\DDD`
sequences (e.g. spaces become `\032`).

* This is normal at the protocol level.
* UIs should decode for display (iOS uses `BonjourEscapes.decode`).

## Enabling / disabling / configuration

* macOS hosts auto-start the bundled LAN discovery plugin by default.
* `openclaw plugins enable bonjour` enables the bundled LAN discovery plugin on hosts where it is not default-enabled.
* `openclaw plugins disable bonjour` disables LAN multicast advertising by disabling the bundled plugin.
* `OPENCLAW_DISABLE_BONJOUR=1` disables LAN multicast advertising without changing plugin config; accepted truthy values are `1`, `true`, `yes`, and `on` (legacy: `OPENCLAW_DISABLE_BONJOUR`).
* `OPENCLAW_DISABLE_BONJOUR=0` forces LAN multicast advertising on, including inside detected containers; accepted falsy values are `0`, `false`, `no`, and `off`.
* When the Bonjour plugin is enabled and `OPENCLAW_DISABLE_BONJOUR` is unset, Bonjour advertises on normal hosts and auto-disables inside detected containers.
* `gateway.bind` in `~/.openclaw/openclaw.json` controls the Gateway bind mode.
* `OPENCLAW_SSH_PORT` overrides the SSH port when `sshPort` is advertised (legacy: `OPENCLAW_SSH_PORT`).
* `OPENCLAW_TAILNET_DNS` publishes a MagicDNS hint in TXT when mDNS full mode is enabled (legacy: `OPENCLAW_TAILNET_DNS`).
* `OPENCLAW_CLI_PATH` overrides the advertised CLI path (legacy: `OPENCLAW_CLI_PATH`).

## Related docs

* Discovery policy and transport selection: [Discovery](/gateway/discovery)
* Node pairing + approvals: [Gateway pairing](/gateway/pairing)